Trodat 6/4913 Replacement Ink Pad

The Trodat 6/4913 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

How to Replace the Ink Pad in a Trodat 4913 Rubber Stamp

Replacing the ink pad in your Trodat Printy 4913 Self-Inking Stamp is quick and hassle-free. Follow these simple steps to refresh your stamp and keep producing clean, sharp impressions.

Step-by-Step Guide:

1. Press the Stamp Down Slightly – Gently press the stamp down about 5mm (¼ inch) until the ink pad becomes visible in the middle. Do not press it all the way down.
2. Lock the Stamp in Position – While holding the stamp in place, press the side locking buttons to keep it steady. This prevents the stamp from springing back up.
3. Remove the Old Ink Pad – Locate the ink pad at the center of the stamp. Using your fingers or a small tool, push the pad outward from the side until it slides out completely.
4. Insert the New Ink Pad – Take your replacement Trodat 6/4913 ink pad and carefully slide it into the slot until it clicks into place. Ensure the inked side is facing downwards.
5. Unlock & Test the Stamp – Release the lock by pressing the stamp slightly. Allow it to return to its normal position. Stamp onto scrap paper a few times to ensure even ink distribution.

Tips for Best Results:

✔ Use Only Genuine Trodat Ink Pads – Ensures consistent, high-quality stamping and prevents damage.
✔ Avoid Touching the Ink Surface – Keeps your fingers clean and prevents smudging.
✔ Replace When Impressions Fade – If your stamp starts producing faint or incomplete prints, it's time for a new ink pad.

By following these steps, your Trodat 4913 Stamp will be ready to provide thousands of crisp, professional impressions with ease! 🖊️ ✅

• Brand - Trodat
• Pad Size - 58 x 22 mm
• Suitable for - Trodat 4913, Trodat 4913 Typo, Trodat 4953
• Available in: Black, Blue, Red, Green & Violet