Trodat 6/4750 Replacement Ink Pad in 6 Ink Colours

The Trodat 6/4750 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their Trodat Date stamp. Each pad usually last for around 1000 impressions.

🌟 How to Replace the Ink Pad on your Trodat 4750 Date Stamp:

1. Lock the Stamp:

   • Press the stamp down slightly (just enough to loosen it) and then press the lock buttons on the sides of the stamp to hold it in place.
   • This will expose the ink pad without the stamp being fully depressed.

2. Remove the Old Ink Pad:

   • Look for the small grip area or tabs on the current ink pad (usually located at the back or sides).
   • Gently push the ink pad out — it should slide out smoothly.

3. Insert the New Ink Pad:

   • Take your replacement 6/4750 ink pad (available in Black, Blue, Red, Green, or Violet).
   • Slide the new ink pad into the same slot, ensuring it's aligned correctly. Push it in until it clicks into place.

4. Release the Lock:

   • Press the stamp down again slightly to release the lock buttons — the stamp should now be ready for use.
   • Test the stamp on a piece of scrap paper to make sure the ink is flowing evenly.

✅ Pro Tips for Changing the 4750 Ink Pads:

• Always handle the ink pad carefully to avoid smudges on your hands.
• If the impressions are too faint or uneven, double-check that the ink pad is fully clicked into position.
• Replacement pads are available in dual-colour (Red/Blue) or single colours — perfect for customising your stamp’s appearance!

• Brand - Trodat
• Pad Size - 42 x 26 mm
• Suitable for - 4750 Date Stamps
• Fits the following stamps: 4940, 4750, 4750/L, 4755, 4760, Dormy Solo 8950, Imprint 6.
• Available in: Black, Blue, Red, Green, Violet & Blue/Red