Trodat 6/4850 Replacement Ink Pad

The Trodat 6/4850 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

How to Replace the Ink Pad in a Trodat 4850 Date Stamp

1. Press Down Slightly – Gently press the stamp down about halfway until you see the ink pad appear in the middle. Be careful not to press too hard.
2. Lock the Stamp in Place – While holding the stamp in the halfway position, press the locking buttons (usually on the sides) to keep it in place. This prevents the stamp from springing back up.
3. Remove the Old Ink Pad – Locate the ink pad at the center of the stamp. Using your fingers or a small tool, push the ink pad out from the side until it slides out completely.
4. Insert the New Ink Pad – Take your replacement Trodat 6/4850 ink pad and slide it into the same slot until it clicks into place. Make sure the inked surface is facing downwards.
5. Unlock & Test the Stamp – Release the locking mechanism by pressing the stamp down slightly. Let it return to its normal position. Stamp on a piece of scrap paper a few times to ensure the ink is distributing evenly.

Tips for Best Results:

✔ Use Only Genuine Trodat Ink Pads – Compatible ink pads ensure the best impressions and prevent damage to your stamp.
✔ Avoid Touching the Inked Surface – This prevents ink stains on your hands and keeps the pad clean for consistent stamping.
✔ Replace When Impressions Fade – If your stamp starts producing light or incomplete impressions, it’s time for a new ink pad.

By following these steps, your Trodat 4850 Date Stamp will be refreshed and ready to provide sharp, clear impressions for thousands more uses! 🚀

• Brand - Trodat
• Pad Size - 25 x 10 mm
• Suitable for - Trodat 4850,  4850/L.
• Available in: Black, Blue, Red, Green, Violet & Blue/Red