Trodat 6/4923 Replacement Ink Pad

How to Replace the Trodat 6/4923 Ink Pad in Your Trodat Printy 4923 Stamp

Replacing the 6/4923 ink pad in your Trodat Printy 4923 or Trodat 4930 self-inking stamp is a quick and simple process that ensures clear and consistent impressions. Follow these easy steps to refresh your stamp.

Step-by-Step Guide for the Trodat 4923 and Trodat 4930 Ink Pad Replacement:

1. Press the Stamp Down Slightly

   • Gently press the stamp down about 5mm (¼ inch) until you see the ink pad become visible in the center.

   • Do not press it fully.

2. Lock the Stamp in Position

   • While holding it in this position, press the locking buttons on the sides to keep it steady.

   • This prevents it from springing back up while replacing the pad.

3. Remove the Old Ink Pad

   • Locate the ink pad in the centre of the stamp.

   • Using your fingers or a small tool, push the pad outward from the side until it slides out completely.

4. Insert the New Ink Pad

   • Take a replacement Trodat 6/4923 ink pad and carefully slide it into the slot until it clicks into place.

   • Ensure the inked surface is facing downward.

5. Unlock & Test the Stamp

   • Release the locking mechanism by pressing the stamp slightly.

   • Let it return to its normal position, then stamp a few times on scrap paper to ensure even ink distribution.

Tips for Best Results:

✔ Use Only Genuine Trodat 6/4923 Ink Pads – Ensures long-lasting, high-quality impressions and prevents damage to the stamp.
✔ Avoid Touching the Ink Surface – Prevents smudging and keeps your hands clean.
✔ Replace When Impressions Fade – If your stamp starts producing faint or uneven prints, it's time for a new ink pad.
✔ Store the Stamp Properly – Keep the stamp closed when not in use to prevent ink from drying out.

By following these steps, your Trodat Printy 4923 Stamp will be refreshed and ready to deliver thousands of sharp, professional impressions with ease! ✅

The Trodat 6/4923 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

• Brand - Trodat
• Pad Size - 30 x 30 mm
• Suitable for - Trodat 4923, Trodat 4930
• Available in: Black, Blue, Red, Green & Violet