Trodat 6/4921 Replacement Ink Pad

How to Replace the Ink Pad in Your Trodat Printy 4921 Stamp

Replacing the 6/4921 ink pad in your Trodat Printy 4921 Self-Inking Stamp is a quick and simple process. Follow these steps to refresh your stamp and ensure clear, high-quality impressions.

Step-by-Step Guide to replace the 4921 Ink Pads:

1. Press the Stamp Down Slightly – Gently press the stamp down about 5mm (¼ inch) until the ink pad is visible in the center. Do not press it fully.

2. Lock the Stamp in Position – While holding it in this position, press the locking buttons on the sides to keep the stamp steady. This prevents it from springing back up.

3. Remove the Old Ink Pad – Locate the ink pad and push it outward from the side using your fingers or a small tool until it slides out completely.

4. Insert the New Ink Pad – Take a replacement Trodat 6/4921 ink pad and carefully slide it into the slot until it clicks into place. Ensure the inked side is facing downward.

5. Unlock & Test the Stamp – Release the lock by pressing the stamp slightly, allowing it to return to its normal position. Stamp a few times on scrap paper to ensure even ink distribution.

Tips for Best Results:

✔ Use Only Genuine Trodat 6/4921 Ink Pads – Ensures crisp, high-quality impressions and prevents stamp damage.
✔ Avoid Touching the Ink Surface – Keeps your hands clean and prevents smudging.
✔ Replace When Impressions Fade – If your stamp starts producing faint or uneven prints, it's time for a new ink pad.

By following these steps, your Trodat Printy 4921 Stamp will be refreshed and ready to create thousands of sharp, professional impressions with ease! ✅

The Trodat 6/4921 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

• Brand - Trodat
• Pad Size - 12 x 12 mm
• Suitable for - 4921
• Available in: Black, Blue, Red, Green & Violet