Trodat 6/4911 Textile Replacement Ink Pad

The Trodat 6/4911 Textile Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

How to Replace the 6/4911 Textile Ink Pad in Your Trodat Printy 4911 Stamp

The Trodat Printy 4911 Textile Stamp is designed for fabric marking using special textile ink. Replacing the 6/4911 Textile Ink Pad is simple and ensures clear, long-lasting impressions on clothing and other textiles. Follow these steps for a clean and efficient ink pad replacement.

Step-by-Step Guide:

1. Press the Stamp Down Slightly – Gently press the stamp down about 5mm (¼ inch) until the ink pad becomes visible in the center. Do not press it fully.
2. Lock the Stamp in Place – While holding the stamp in this position, press the locking buttons on the sides to keep it steady. This prevents the stamp from springing back up.
3. Remove the Old Ink Pad – Locate the ink pad in the center of the stamp. Using your fingers or a small tool, push the pad outward from the side until it slides out completely.
4. Insert the New Textile Ink Pad – Take a replacement Trodat 6/4911 Textile Ink Pad and carefully slide it into the slot until it clicks into place. Ensure the inked surface is facing downward.
5. Unlock & Test the Stamp – Release the lock by pressing the stamp slightly, allowing it to return to its normal position. Test it on scrap fabric or paper to ensure even ink distribution.

Important Tips for Best Results:

✔ Use Only Genuine 6/4911 Textile Ink Pads – These pads are designed for fabric stamping and will provide wash-resistant impressions.
✔ Avoid Touching the Ink Surface – Textile ink is more concentrated than standard ink, so avoid getting it on your hands or clothes.
✔ Let the Ink Dry Before Washing – After stamping onto fabric, allow at least 24 hours for the ink to set before washing.
✔ Replace When Impressions Fade – If your textile stamp starts producing light or incomplete prints, it's time for a new ink pad.

By following these steps, your Trodat Printy 4911 Textile Stamp will be refreshed and ready to create long-lasting, wash-resistant impressions on clothing, uniforms, and fabric items! 🏷️ ✅

• Brand - Trodat
• Pad Size - 38 x 14 mm
• Suitable for - 4911 Textile, Imprint 11 Textile
• Available in: Black, Blue, Red, Green & Violet