Trodat 6/4916 Replacement Ink Pad

How to Replace the Ink Pad in Your Trodat Printy 4916 Stamp

Replacing the 6/4916 ink pad in your Trodat Printy 4916 Self-Inking Stamp is a simple process. Follow these steps to refresh your stamp for sharp, clear impressions.

Step-by-Step Guide for the Trodat 4916 Ink Pads:

1. Press the Stamp Down Slightly – Gently press the stamp down about 5mm (¼ inch) until the ink pad appears in the center. Do not press it fully.

2. Lock the Stamp in Place – While holding the stamp in this position, press the side locking buttons to keep it steady. This prevents it from springing back up.

3. Remove the Old Ink Pad – Locate the ink pad and push it outward from the side using your fingers or a small tool until it slides out completely.

4. Insert the New Ink Pad – Take a replacement Trodat 6/4916 ink pad and carefully slide it into the slot until it clicks into place. Ensure the inked surface is facing downward.

5. Unlock & Test the Stamp – Release the lock by pressing the stamp slightly, allowing it to return to its normal position. Stamp a few times on scrap paper to ensure even ink distribution.

Tips for Best Results:

✔ Use Only Genuine Trodat 6/4916 Ink Pads – Ensures long-lasting, high-quality impressions and prevents damage to the stamp.
✔ Avoid Touching the Ink Surface – Keeps your hands clean and prevents smudging.
✔ Replace When Impressions Fade – If your stamp starts producing faint or incomplete prints, it's time for a new ink pad.

By following these steps, your Trodat Printy 4916 Stamp will be refreshed and ready to create thousands of crisp, professional impressions with ease! ✅

The Trodat 6/4916 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

• Brand - Trodat
• Pad Size - 70 x 15 mm
• Suitable for - Trodat 4916
• Available in: Black, Blue, Red, Green & Violet