Trodat 6/4912 Replacement Ink Pad

The Trodat 6/4912 Replacement pad will give you a clean and clear stamped image. The replacement pads are cost effective and essential for any person who is regularly using their stamp. Each pad usually last for around 1000 impressions.

How to Replace the Ink Pad in a Trodat 4912 Stamp

Replacing the ink pad in your Trodat Printy 4912 Self-Inking Stamp is a simple process. Follow these steps to ensure a quick and mess-free replacement:

Step-by-Step Guide:

1. Press Down Slightly – Gently press the stamp down about 5mm (¼ inch) until you see the ink pad in the middle. Do not press all the way down.
2. Lock the Stamp in Place – While holding the stamp in position, press the side locking buttons to keep it steady. This prevents it from springing back up.
3. Remove the Old Ink Pad – Locate the ink pad in the center and push it outwards from the side using your finger or a small tool until it slides out completely.
4. Insert the New Ink Pad – Take your replacement Trodat 6/4912 ink pad and slide it into the same slot until it clicks into place. Ensure the inked surface is facing downwards.
5. Unlock the Stamp & Test It – Release the locking mechanism by pressing the stamp down slightly. Allow it to return to its normal position. Stamp on scrap paper a few times to ensure even ink distribution.

Tips for Best Results:

✔ Use Only Genuine Trodat Ink Pads – Ensures optimal performance and prevents damage.
✔ Avoid Touching the Ink Surface – Keeps the pad clean and prevents ink stains on your hands.
✔ Replace When Impressions Fade – If your stamp starts producing faint or incomplete prints, it's time for a new ink pad.

By following these steps, your Trodat 4912 Stamp will be refreshed and ready to deliver sharp, clear impressions for thousands more uses! 🎯

• Brand - Trodat
• Pad Size - 48 x 18 mm
• Suitable for - Trodat 4912, Trodat 4912 Typo,  Trodat 496201-04, Trodat 4952
• Available in: Black, Blue, Red, Green & Violet